產品介紹

中文：

自驅動整機平衡根據實際工件設計獨特的專業工裝夾具,充分考慮各組件特點，消除組件裝配所生產的二次平衡誤差，降低軸承等零部件裝配誤差引起的不平衡量。模擬實際動作狀態,將誤差減到最小。 

英文：

Self driving machine balancing according to the actual workpiece design special professional tooling, fully considering the characteristics of each component, eliminating the two balance error produced by assembly assembly, and reducing the imbalance caused by assembly errors of bearings and other components. The actual state of action is simulated, and the error is minimized

產品介紹

中文：

自動定位系列平衡機采用下壓式傳動結構，方便快捷上下料，啟用先進的測量系統及精準的定位裝置，實現操作方便，效率高，無須貼標簽、找角度等繁瑣節拍，從啟動測量到停止只需3-5秒.可額外配置打點裝置，標記不平衡位置 ；

英文：

The pressure transmission structure of automatic positioning series balancing machine, convenient loading and unloading, enable the advanced measurement system and achieve precise positioning device, convenient operation, high efficiency, no label, find the angle such as rhythm, from the start to stop measuring just 3-5 seconds. An additional configuration RBI device, marking the imbalance position；

產品介紹

中文：

全自動平衡機采用PLC控制系統性能穩定，觸摸屏人機對話界面?，設計結構合理，方便維護，?整機采用自主研發高精密系統、傳感器及進口電氣元件。操作簡單，一人可操作多臺機器，降低企業用工成本。?轉子無需作任何記號即可進行測量，操作簡單，學習快，上崗快。

英文：

The automatic balancing machine adopts PLC control system with stable performance, touch screen man-machine interface, reasonable design structure and convenient maintenance. The whole machine adopts self-developed high precision system, sensors and imported electrical components. Simple operation, one person can operate more than one machine, reduce the cost of enterprise labor. Rotor can be measured without any marking. It is easy to operate, fast to learn and fast to work.